You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Home > Control Tower | SmartDNS > Windows > Windows Vista Setup for Privado Control Tower
Windows Vista Setup for Privado Control Tower
print icon

These setup instructions only need to be performed once. After initial setup, you’ll be able to use Privado Control Tower automatically.

 

1. Go to the Start Menu and click Control Panel.

 

 

2. Select View network status and tasks from the Control Panel.

 

 

3. Click on View Status.

4. Click Properties in the window.

5. If Vista asks for permission to make changes, click Continue.

6. Select Internet Protocol Version 4 (TCP/IPv4), then click the Properties button.

7. Select the radio button for “Use the following DNS server addresses” and enter the following IP addresses.

 

Preferred DNS server: 91.148.225.50

Alternate DNS server: 91.148.229.50

 

 

9.  Click on OK.

10. Restart your computer.


If you have any further questions or concerns, feel free to reach out to us via our Support Form at https://support.privadovpn.com/new or https://support.privado.live/new  

Feedback
0 out of 0 found this helpful

scroll to top icon