You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Home > Control Tower | SmartDNS > iOS > iPhone Setup for Privado Control Tower
iPhone Setup for Privado Control Tower
print icon

These setup instructions only need to be performed once. After initial setup, you’ll be able to use Privado Control Tower automatically.

 

1. Open your Settings from the iPhone home screen and then tap Wi-Fi.

2. Find the Wi-Fi network you use and tap the ⓘ icon:

3. Scroll down and tap "Configure DNS":

4. Tap Manual.

5. Delete the current DNS servers, tap Add Server, and enter the following IP addresses:

 

91.148.225.50

91.148.229.50

 

6. Click "Save".


If you have any further questions or concerns, feel free to reach out to us via our Support Form at https://support.privadovpn.com/new or https://support.privado.live/new  

Feedback
10 out of 11 found this helpful

scroll to top icon